FUJI ELECTRIC 2.5hp Regenerative Blower 1 Phase, 200-230 V., 1-1/2" (F)NPT Inlet

Description

PUMP WAS DAMAGED IN SHIPPING, MOTOR SPINS FREELY, FAN AND SHROUD ARE BENT, MAKES A SLIGHT SCRUBBING NOISE WHEN SPINNING, NOT SURE WHAT IS RUBBING INSIDE, BLOWS AIR WHEN SPUN BY HAND. MOUNTING FOOT IS CRACKED, COVER PLATE IS MISSING, INLET/OUTLET HOUSING IS CRACKED AND TOP SCREWS SHEARED OFF. SOLD AS IS FOR PARTS, NO RETURNS, SEE PICTURES.
Product Details
Industrial-duty, oilless air blower can be used for pressure or vacuum. Flows without pulsation at low noise levels and is dynamically balanced to eliminate vibration. Equipped with continuous duty TEFC motor. Use as original equipment or for upgraded performance. Suitable for use in pneumatic air tube conveying systems, vacuum cleaning systems, vacuum lifting, vacuum hold down, vacuum transport, bottle filling stations, printing presses, screen printing, air cushion tables, drying systems, weld fume extraction, textile machinery, dental equipment, waste and water fish pond aeration, aquarium aeration, aeration plating tanks, and air knife systems. For use with air and noncombustible, noncorrosive, nonexplosive gases.
Note: A vacuum or pressure relief valve (sold separately) is required for proper operation.
Performance ratings shown are rated with motor running at 60 Hz. If 50 Hz is used, deduct 1/5 from rating. Min. cfm ratings are at continuous flow. Relief valves are mandatory for flow conditions that are under min. or less.
Conversions: to psi = (in. of water x 0.036); to in. Hg = (in. of water x 0.074).
Technical Specs
Item
Regenerative Blower
Inlet Size
1-1/2" (F)NPT
Outlet Size
1-1/2" (F)NPT
HP
2.5
Voltage
200-230
Phase
1
Full Load Amps
11
Max. Pressure
80" WC
Max. Flow Rate
154 CFM
Max. Vacuum
70" WC
Max. Ambient Temp.
104 Degrees F
Housing Material
Aluminum Alloy
Overall Length
15-7/32"
Overall Height
13-7/8"
Overall Depth
13-9/16"
Standards
Class B NEMA Insulation